| |
儀表 中英
儀表的編輯流程
Procedures for editing the instrument
第1 步：按下并保持ENTER鍵：
Step 1: keep pressing the ENTER key:
■保持2秒鐘可進入標定菜單（CALIBRATE）
■Keep pressing the ENTER key for 2 seconds, and the system will enter into CALIBRATE menu.
■保持5秒鐘可進入選項菜單（OPTIONS）
■Keep pressing the ENTER key for 5 seconds, and the system will enter into OPTIONS menu.
第2 步：密碼為順序按上-上-上-下方向鍵
Step 2: Press the Up-Up-Up-Down arrow keys according to the sequence of the password.
■輸入密碼后，將顯示所選菜單的第一項內容
■ After the password is typed in, the first item of the selected menu option will be displayed.
第3 步：上或下方向鍵翻動菜單
Step 3: Drag the menu by pressing the Up or Down key.
■ 同時按下上或下方向鍵退出菜單返回測量狀態
■Press the Up or Down arrow key to exit the menu and return to measurement status.
第4 步：用右向鍵選中要進行編輯的菜單項
Step 4: Choose the menu option to be edited by pressing the Right arrow key.
■ 顯示內容的第一位開始閃動
■ The first bit of the displayed content starts to flicker.
第5 步：按上或下方向鍵對閃動位進行編輯gxgkickz.com
Step 5: Press the Up or Down arrow key to edit at the flicker bit.
■ 按右向鍵前移閃動位的位置
■ Press the Right arrow key to move the flicker bit forward.
■ 同時按下上或下方向鍵返回上一級菜單
■ Press the Up or Down arrow key to return to the previous menu.
第6 步：按 ENTER 鍵保存新的設置內容并返回到第3 步
Step 6: Press the ENTER key to save the new settings and then return to Step 3.
標定流程
Calibration Procedures
儀器在出廠時已進行了電氣標定。
Electrical calibration for an instrument should be done in the factory.
■ 流程A：用精確的（±0.1%）固定電阻器模擬溫度與電導率值，對儀表的精度與線性度進行校驗。
■ Procedure A: Verify the accuracy and linearity of an instrument with accurate (±0.1%) fixed-resistor-simulated temperature and conductivity values.
■ 流程B：濕標定過程。本流程需要用傳感器輸入信號與NIST 可追溯性測試液。正確操作，會完成最精確的系統標定。
■ Procedure B: Wet calibration process. This procedure needs the sensor input signals and NIST traceable test liquid. Correct operation will result in the most accurate system calibration.
|
|
翻譯樣本 
